DIGSI 4

DIGSI 4 & SIPROTEC 4 Training

• Part 1 (01:57): How to install DIGSI 4
• Part 2 (06:50): Introduction to SIPROTEC Relay Families
• Part 3 (03:02): Wiring Connection
• Part 4 (19:12): Start with DIGSI
• Part 5 (12:36): Archive, Export, Import
• Part 6 (11:00): Masking I/O
• Part 7 (04:51): Masking I/O
• Part 8 (13:08): Masking I/O
• Part 9 (16:21): Default and Control Display
• Part 10 (11:57): CFC
• Part 11 (07:59): CFC and Implementation of Experimental Example
• Part 12 (04:26): CFC Interlocking Example
• Part 13 (04:13): CFC Protection Example
• Part 14 (11:01): CFC Explanation of all blocks
• Part 15 (08:34): Power system data 1
• Part 16 (19:13): Setting Group
• Part 17 (03:06): Oscillographic Fault Recorders
• Part 18 (04:39): General Device Settings
• Part 19 (03:40): Time Synchronization and Interfaces
• Part 20 (09:04): Device Driver and Firmware Update
• Part 21 (14:36): Config SIPROTEC relay in a Practical Project

Course Updates:

• U01: SIPROTEC 4 relays and SIPROETC 4 functions (34 minutes)
• U02: DIGSI 4 and relay configuration steps (30 minutes)
• U03: SIPROTEC 4 signals and DIGSI 4 masking IO (18 minutes)
• U04: Connect to SIPROTEC 4, DIGSI 4 online mode, event log, trip log, measurement, and fault recorder (17 minutes)
• U05: SIPROTEC 7UT6 config & setting (10 minutes)